Product Description: Programming

Setting the Current Time: 1. Keep the "CLOCK" button pressed throughout the setting operation. 2. Press the "WEEK", "HOUR", and "MIN" buttons to set the corresponding time.

ON/OFF Program Setting: 1. Press the "PROG" button once. 2. Press the "WEEK", "HOUR", and "MIN" buttons to set the ON time. 3. Press the "PROG" button to save and proceed to the "1 OFF" setting.

Mode Switch: 1. Hold the 'MANUAL' button for 4 seconds to switch to the AUTO mode. 2. Set the slide switch to AUTO. Note: Programs only work when both settings are in AUTO mode.

Daylight Saving Time Function: Pressing 'HOUR' + 'MIN' simultaneously allows you to switch to daylight saving time.

DIGITAL TIMER SPECIFICATIONS: Input Voltage: 120-240VAC, 60Hz, 40A resistive Output 1: 277VAC, 60Hz, 30A resistive Output 2: 14VDC, 30A resistive Output 3: 120VAC, 1HP, 10A Ballast Output 4: 208-240VAC, 2HP, 5A Ballast Output 5: 277VAC, 1HP, 5A Ballast Output 6: 120VAC, 8.3A Tungsten Output 7: 208-277VAC, 5.4A Tungsten Output 8: 120VAC, 800VA Pilot Duty; 208-277VAC, 720VA Pilot Duty Max programs per week: 8 ON/OFF Min. Setting time: 1 Minute Max. Setting Time: 7 Days Environmental rating: -40°F to 130°F Humidity: 0-95%

Troubleshooting: a. Ensure that the AM and PM settings are correct in the current time and program settings. b. Verify that the timer program is set to the AUTO setting.

If the number is not clear or blank on the screen, please power on the timer for 30 minutes to charge the internal battery, then press the Reset button.

If the timer cannot turn ON or turn OFF on time, please check if the Random function is active.

If the timer is always ON or always OFF, please check if the program is in Auto mode.

product information: